REGEXP REGULAR EXPRESSION DETAILS


       The  syntax and semantics of the regular expressions that are supported
       by PCRE are described in detail below. There is a quick-reference  syn-
       tax summary in the pcresyntax page. PCRE tries to match Perl syntax and
       semantics as closely as it can. PCRE  also  supports  some  alternative
       regular  expression  syntax (which does not conflict with the Perl syn-
       tax) in order to provide some compatibility with regular expressions in
       Python, .NET, and Oniguruma.

       Perl's  regular expressions are described in its own documentation, and
       regular expressions in general are covered in a number of  books,  some
       of  which  have  copious  examples. Jeffrey Friedl's "Mastering Regular
       Expressions", published by  O'Reilly,  covers  regular  expressions  in
       great  detail.  This  description  of  PCRE's  regular  expressions  is
       intended as reference material.

       The original operation of PCRE was on strings of  one-byte  characters.
       However,  there is now also support for UTF-8 character strings. To use
       this, you must build PCRE to  include  UTF-8  support,  and  then  call
       pcre_compile()  with  the  PCRE_UTF8  option.  How this affects pattern
       matching is mentioned in several places below. There is also a  summary
       of  UTF-8  features  in  the  section on UTF-8 support in the main pcre
       page.

       The remainder of this document discusses the  patterns  that  are  sup-
       ported  by  PCRE when its main matching function, pcre_exec(), is used.
       From  release  6.0,   PCRE   offers   a   second   matching   function,
       pcre_dfa_exec(),  which matches using a different algorithm that is not
       Perl-compatible. Some of the features discussed below are not available
       when  pcre_dfa_exec()  is used. The advantages and disadvantages of the
       alternative function, and how it differs from the normal function,  are
       discussed in the pcrematching page.


NEWLINE CONVENTIONS


       PCRE  supports five different conventions for indicating line breaks in
       strings: a single CR (carriage return) character, a  single  LF  (line-
       feed) character, the two-character sequence CRLF, any of the three pre-
       ceding, or any Unicode newline sequence. The pcreapi page  has  further
       discussion  about newlines, and shows how to set the newline convention
       in the options arguments for the compiling and matching functions.

       It is also possible to specify a newline convention by starting a  pat-
       tern string with one of the following five sequences:

         (*CR)        carriage return
         (*LF)        linefeed
         (*CRLF)      carriage return, followed by linefeed
         (*ANYCRLF)   any of the three above
         (*ANY)       all Unicode newline sequences

       compatibility.  However, this can be changed; see the description of \R
       in the section entitled "Newline sequences" below. A change of \R  set-
       ting can be combined with a change of newline convention.


CHARACTERS AND METACHARACTERS


       A  regular  expression  is  a pattern that is matched against a subject
       string from left to right. Most characters stand for  themselves  in  a
       pattern,  and  match  the corresponding characters in the subject. As a
       trivial example, the pattern

         The quick brown fox

       matches a portion of a subject string that is identical to itself. When
       caseless  matching is specified (the PCRE_CASELESS option), letters are
       matched independently of case. In UTF-8 mode, PCRE  always  understands
       the  concept  of case for characters whose values are less than 128, so
       caseless matching is always possible. For characters with  higher  val-
       ues,  the concept of case is supported if PCRE is compiled with Unicode
       property support, but not otherwise.   If  you  want  to  use  caseless
       matching  for  characters  128  and above, you must ensure that PCRE is
       compiled with Unicode property support as well as with UTF-8 support.

       The power of regular expressions comes  from  the  ability  to  include
       alternatives  and  repetitions in the pattern. These are encoded in the
       pattern by the use of metacharacters, which do not stand for themselves
       but instead are interpreted in some special way.

       There  are  two different sets of metacharacters: those that are recog-
       nized anywhere in the pattern except within square brackets, and  those
       that  are  recognized  within square brackets. Outside square brackets,
       the metacharacters are as follows:

         \      general escape character with several uses
         ^      assert start of string (or line, in multiline mode)
         $      assert end of string (or line, in multiline mode)
         .      match any character except newline (by default)
         [      start character class definition
         |      start of alternative branch
         (      start subpattern
         )      end subpattern
         ?      extends the meaning of (
                also 0 or 1 quantifier
                also quantifier minimizer
         *      0 or more quantifier
         +      1 or more quantifier
                also "possessive quantifier"
         {      start min/max quantifier

       Part of a pattern that is in square brackets  is  called  a  "character
       class". In a character class the only metacharacters are:

       applies both inside and outside character classes.

       For  example,  if  you want to match a * character, you write \* in the
       pattern.  This escaping action applies whether  or  not  the  following
       character  would  otherwise be interpreted as a metacharacter, so it is
       always safe to precede a non-alphanumeric  with  backslash  to  specify
       that  it stands for itself. In particular, if you want to match a back-
       slash, you write \\.

       If a pattern is compiled with the PCRE_EXTENDED option,  whitespace  in
       the  pattern (other than in a character class) and characters between a
       # outside a character class and the next newline are ignored. An escap-
       ing  backslash  can  be  used to include a whitespace or # character as
       part of the pattern.

       If you want to remove the special meaning from a  sequence  of  charac-
       ters,  you can do so by putting them between \Q and \E. This is differ-
       ent from Perl in that $ and  @  are  handled  as  literals  in  \Q...\E
       sequences  in  PCRE, whereas in Perl, $ and @ cause variable interpola-
       tion. Note the following examples:

         Pattern            PCRE matches   Perl matches

         \Qabc$xyz\E        abc$xyz        abc followed by the
                                             contents of $xyz
         \Qabc\$xyz\E       abc\$xyz       abc\$xyz
         \Qabc\E\$\Qxyz\E   abc$xyz        abc$xyz

       The \Q...\E sequence is recognized both inside  and  outside  character
       classes.

   Non-printing characters

       A second use of backslash provides a way of encoding non-printing char-
       acters in patterns in a visible manner. There is no restriction on  the
       appearance  of non-printing characters, apart from the binary zero that
       terminates a pattern, but when a pattern  is  being  prepared  by  text
       editing,  it  is  usually  easier  to  use  one of the following escape
       sequences than the binary character it represents:

         \a        alarm, that is, the BEL character (hex 07)
         \cx       "control-x", where x is any character
         \e        escape (hex 1B)
         \f        formfeed (hex 0C)
         \n        linefeed (hex 0A)
         \r        carriage return (hex 0D)
         \t        tab (hex 09)
         \ddd      character with octal code ddd, or backreference
         \xhh      character with hex code hh
         \x{hhh..} character with hex code hhh..

       The precise effect of \cx is as follows: if x is a lower  case  letter,
       escape,  with  no  following  digits, giving a character whose value is
       zero.

       Characters whose value is less than 256 can be defined by either of the
       two  syntaxes  for  \x. There is no difference in the way they are han-
       dled. For example, \xdc is exactly the same as \x{dc}.

       After \0 up to two further octal digits are read. If  there  are  fewer
       than  two  digits,  just  those  that  are  present  are used. Thus the
       sequence \0\x\07 specifies two binary zeros followed by a BEL character
       (code  value 7). Make sure you supply two digits after the initial zero
       if the pattern character that follows is itself an octal digit.

       The handling of a backslash followed by a digit other than 0 is compli-
       cated.  Outside a character class, PCRE reads it and any following dig-
       its as a decimal number. If the number is less than  10,  or  if  there
       have been at least that many previous capturing left parentheses in the
       expression, the entire  sequence  is  taken  as  a  back  reference.  A
       description  of how this works is given later, following the discussion
       of parenthesized subpatterns.

       Inside a character class, or if the decimal number is  greater  than  9
       and  there have not been that many capturing subpatterns, PCRE re-reads
       up to three octal digits following the backslash, and uses them to gen-
       erate  a data character. Any subsequent digits stand for themselves. In
       non-UTF-8 mode, the value of a character specified  in  octal  must  be
       less  than  \400.  In  UTF-8 mode, values up to \777 are permitted. For
       example:

         \040   is another way of writing a space
         \40    is the same, provided there are fewer than 40
                   previous capturing subpatterns
         \7     is always a back reference
         \11    might be a back reference, or another way of
                   writing a tab
         \011   is always a tab
         \0113  is a tab followed by the character "3"
         \113   might be a back reference, otherwise the
                   character with octal code 113
         \377   might be a back reference, otherwise
                   the byte consisting entirely of 1 bits
         \81    is either a back reference, or a binary zero
                   followed by the two characters "8" and "1"

       Note that octal values of 100 or greater must not be  introduced  by  a
       leading zero, because no more than three octal digits are ever read.

       All the sequences that define a single character value can be used both
       inside and outside character classes. In addition, inside  a  character
       class,  the  sequence \b is interpreted as the backspace character (hex
       08), and the sequences \R and \X are interpreted as the characters  "R"
       and  "X", respectively. Outside a character class, these sequences have
       Details are discussed later.   Note  that  \g{...}  (Perl  syntax)  and
       \g<;...>;  (Oniguruma  syntax)  are  not synonymous. The former is a back
       reference; the latter is a subroutine call.

   Generic character types

       Another use of backslash is for specifying generic character types. The
       following are always recognized:

         \d     any decimal digit
         \D     any character that is not a decimal digit
         \h     any horizontal whitespace character
         \H     any character that is not a horizontal whitespace character
         \s     any whitespace character
         \S     any character that is not a whitespace character
         \v     any vertical whitespace character
         \V     any character that is not a vertical whitespace character
         \w     any "word" character
         \W     any "non-word" character

       Each pair of escape sequences partitions the complete set of characters
       into two disjoint sets. Any given character matches one, and only  one,
       of each pair.

       These character type sequences can appear both inside and outside char-
       acter classes. They each match one character of the  appropriate  type.
       If  the current matching point is at the end of the subject string, all
       of them fail, since there is no character to match.

       For compatibility with Perl, \s does not match the VT  character  (code
       11).   This makes it different from the the POSIX "space" class. The \s
       characters are HT (9), LF (10), FF (12), CR (13), and  space  (32).  If
       "use locale;" is included in a Perl script, \s may match the VT charac-
       ter. In PCRE, it never does.

       In UTF-8 mode, characters with values greater than 128 never match  \d,
       \s, or \w, and always match \D, \S, and \W. This is true even when Uni-
       code character property support is available.  These  sequences  retain
       their original meanings from before UTF-8 support was available, mainly
       for efficiency reasons.

       The sequences \h, \H, \v, and \V are Perl 5.10 features. In contrast to
       the  other  sequences, these do match certain high-valued codepoints in
       UTF-8 mode.  The horizontal space characters are:

         U+0009     Horizontal tab
         U+0020     Space
         U+00A0     Non-break space
         U+1680     Ogham space mark
         U+180E     Mongolian vowel separator
         U+2000     En quad
         U+2001     Em quad

         U+000A     Linefeed
         U+000B     Vertical tab
         U+000C     Formfeed
         U+000D     Carriage return
         U+0085     Next line
         U+2028     Line separator
         U+2029     Paragraph separator

       A "word" character is an underscore or any character less than 256 that
       is  a  letter  or  digit.  The definition of letters and digits is con-
       trolled by PCRE's low-valued character tables, and may vary if  locale-
       specific  matching is taking place (see "Locale support" in the pcreapi
       page). For example, in a French locale such  as  "fr_FR"  in  Unix-like
       systems,  or "french" in Windows, some character codes greater than 128
       are used for accented letters, and these are matched by \w. The use  of
       locales with Unicode is discouraged.

   Newline sequences

       Outside  a  character class, by default, the escape sequence \R matches
       any Unicode newline sequence. This is a Perl 5.10 feature. In non-UTF-8
       mode \R is equivalent to the following:

         (?>;\r\n|\n|\x0b|\f|\r|\x85)

       This  is  an  example  of an "atomic group", details of which are given
       below.  This particular group matches either the two-character sequence
       CR  followed  by  LF,  or  one  of  the single characters LF (linefeed,
       U+000A), VT (vertical tab, U+000B), FF (formfeed, U+000C), CR (carriage
       return, U+000D), or NEL (next line, U+0085). The two-character sequence
       is treated as a single unit that cannot be split.

       In UTF-8 mode, two additional characters whose codepoints  are  greater
       than 255 are added: LS (line separator, U+2028) and PS (paragraph sepa-
       rator, U+2029).  Unicode character property support is not  needed  for
       these characters to be recognized.

       It is possible to restrict \R to match only CR, LF, or CRLF (instead of
       the complete set  of  Unicode  line  endings)  by  setting  the  option
       PCRE_BSR_ANYCRLF either at compile time or when the pattern is matched.
       (BSR is an abbrevation for "backslash R".) This can be made the default
       when  PCRE  is  built;  if this is the case, the other behaviour can be
       requested via the PCRE_BSR_UNICODE option.   It  is  also  possible  to
       specify  these  settings  by  starting a pattern string with one of the
       following sequences:

         (*BSR_ANYCRLF)   CR, LF, or CRLF only
         (*BSR_UNICODE)   any Unicode newline sequence

       These override the default and the options given to pcre_compile(), but
       they can be overridden by options given to pcre_exec(). Note that these
       are available.  When not in UTF-8 mode, these sequences are  of  course
       limited  to  testing characters whose codepoints are less than 256, but
       they do work in this mode.  The extra escape sequences are:

         \p{xx}   a character with the xx property
         \P{xx}   a character without the xx property
         \X       an extended Unicode sequence

       The property names represented by xx above are limited to  the  Unicode
       script names, the general category properties, and "Any", which matches
       any character (including newline). Other properties such as "InMusical-
       Symbols"  are  not  currently supported by PCRE. Note that \P{Any} does
       not match any characters, so always causes a match failure.

       Sets of Unicode characters are defined as belonging to certain scripts.
       A  character from one of these sets can be matched using a script name.
       For example:

         \p{Greek}
         \P{Han}

       Those that are not part of an identified script are lumped together  as
       "Common". The current list of scripts is:

       Arabic,  Armenian,  Balinese,  Bengali,  Bopomofo,  Braille,  Buginese,
       Buhid,  Canadian_Aboriginal,  Cherokee,  Common,   Coptic,   Cuneiform,
       Cypriot, Cyrillic, Deseret, Devanagari, Ethiopic, Georgian, Glagolitic,
       Gothic, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hebrew,  Hira-
       gana,  Inherited,  Kannada,  Katakana,  Kharoshthi,  Khmer, Lao, Latin,
       Limbu,  Linear_B,  Malayalam,  Mongolian,  Myanmar,  New_Tai_Lue,  Nko,
       Ogham,  Old_Italic,  Old_Persian, Oriya, Osmanya, Phags_Pa, Phoenician,
       Runic,  Shavian,  Sinhala,  Syloti_Nagri,  Syriac,  Tagalog,  Tagbanwa,
       Tai_Le, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Yi.

       Each  character has exactly one general category property, specified by
       a two-letter abbreviation. For compatibility with Perl, negation can be
       specified  by  including a circumflex between the opening brace and the
       property name. For example, \p{^Lu} is the same as \P{Lu}.

       If only one letter is specified with \p or \P, it includes all the gen-
       eral  category properties that start with that letter. In this case, in
       the absence of negation, the curly brackets in the escape sequence  are
       optional; these two examples have the same effect:

         \p{L}
         \pL

       The following general category property codes are supported:

         C     Other
         Cc    Control
         Cf    Format
         Mn    Non-spacing mark

         N     Number
         Nd    Decimal number
         Nl    Letter number
         No    Other number

         P     Punctuation
         Pc    Connector punctuation
         Pd    Dash punctuation
         Pe    Close punctuation
         Pf    Final punctuation
         Pi    Initial punctuation
         Po    Other punctuation
         Ps    Open punctuation

         S     Symbol
         Sc    Currency symbol
         Sk    Modifier symbol
         Sm    Mathematical symbol
         So    Other symbol

         Z     Separator
         Zl    Line separator
         Zp    Paragraph separator
         Zs    Space separator

       The  special property L&; is also supported: it matches a character that
       has the Lu, Ll, or Lt property, in other words, a letter  that  is  not
       classified as a modifier or "other".

       The  Cs  (Surrogate)  property  applies only to characters in the range
       U+D800 to U+DFFF. Such characters are not valid in UTF-8  strings  (see
       RFC 3629) and so cannot be tested by PCRE, unless UTF-8 validity check-
       ing has been turned off (see the discussion  of  PCRE_NO_UTF8_CHECK  in
       the pcreapi page).

       The  long  synonyms  for  these  properties that Perl supports (such as
       \p{Letter}) are not supported by PCRE, nor is it  permitted  to  prefix
       any of these properties with "Is".

       No character that is in the Unicode table has the Cn (unassigned) prop-
       erty.  Instead, this property is assumed for any code point that is not
       in the Unicode table.

       Specifying  caseless  matching  does not affect these escape sequences.
       For example, \p{Lu} always matches only upper case letters.

       The \X escape matches any number of Unicode  characters  that  form  an
       extended Unicode sequence. \X is equivalent to

         (?>;\PM\pM*)

       The escape sequence \K, which is a Perl 5.10 feature, causes any previ-
       ously matched characters not  to  be  included  in  the  final  matched
       sequence. For example, the pattern:

         foo\Kbar

       matches  "foobar",  but reports that it has matched "bar". This feature
       is similar to a lookbehind assertion (described  below).   However,  in
       this  case, the part of the subject before the real match does not have
       to be of fixed length, as lookbehind assertions do. The use of \K  does
       not  interfere  with  the setting of captured substrings.  For example,
       when the pattern

         (foo)\Kbar

       matches "foobar", the first substring is still set to "foo".

   Simple assertions

       The final use of backslash is for certain simple assertions. An  asser-
       tion  specifies a condition that has to be met at a particular point in
       a match, without consuming any characters from the subject string.  The
       use  of subpatterns for more complicated assertions is described below.
       The backslashed assertions are:

         \b     matches at a word boundary
         \B     matches when not at a word boundary
         \A     matches at the start of the subject
         \Z     matches at the end of the subject
                 also matches before a newline at the end of the subject
         \z     matches only at the end of the subject
         \G     matches at the first matching position in the subject

       These assertions may not appear in character classes (but note that  \b
       has a different meaning, namely the backspace character, inside a char-
       acter class).

       A word boundary is a position in the subject string where  the  current
       character  and  the previous character do not both match \w or \W (i.e.
       one matches \w and the other matches \W), or the start or  end  of  the
       string if the first or last character matches \w, respectively.

       The  \A,  \Z,  and \z assertions differ from the traditional circumflex
       and dollar (described in the next section) in that they only ever match
       at  the  very start and end of the subject string, whatever options are
       set. Thus, they are independent of multiline mode. These  three  asser-
       tions are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options, which
       affect only the behaviour of the circumflex and dollar  metacharacters.
       However,  if the startoffset argument of pcre_exec() is non-zero, indi-
       cating that matching is to start at a point other than the beginning of
       the  subject,  \A  can never match. The difference between \Z and \z is
       at a time, it cannot reproduce this behaviour.

       If all the alternatives of a pattern begin with \G, the  expression  is
       anchored to the starting match position, and the "anchored" flag is set
       in the compiled regular expression.


CIRCUMFLEX AND DOLLAR


       Outside a character class, in the default matching mode, the circumflex
       character  is  an  assertion  that is true only if the current matching
       point is at the start of the subject string. If the  startoffset  argu-
       ment  of  pcre_exec()  is  non-zero,  circumflex can never match if the
       PCRE_MULTILINE option is unset. Inside a  character  class,  circumflex
       has an entirely different meaning (see below).

       Circumflex  need  not be the first character of the pattern if a number
       of alternatives are involved, but it should be the first thing in  each
       alternative  in  which  it appears if the pattern is ever to match that
       branch. If all possible alternatives start with a circumflex, that  is,
       if  the  pattern  is constrained to match only at the start of the sub-
       ject, it is said to be an "anchored" pattern.  (There  are  also  other
       constructs that can cause a pattern to be anchored.)

       A  dollar  character  is  an assertion that is true only if the current
       matching point is at the end of  the  subject  string,  or  immediately
       before a newline at the end of the string (by default). Dollar need not
       be the last character of the pattern if a number  of  alternatives  are
       involved,  but  it  should  be  the last item in any branch in which it
       appears. Dollar has no special meaning in a character class.

       The meaning of dollar can be changed so that it  matches  only  at  the
       very  end  of  the string, by setting the PCRE_DOLLAR_ENDONLY option at
       compile time. This does not affect the \Z assertion.

       The meanings of the circumflex and dollar characters are changed if the
       PCRE_MULTILINE  option  is  set.  When  this  is the case, a circumflex
       matches immediately after internal newlines as well as at the start  of
       the  subject  string.  It  does not match after a newline that ends the
       string. A dollar matches before any newlines in the string, as well  as
       at  the very end, when PCRE_MULTILINE is set. When newline is specified
       as the two-character sequence CRLF, isolated CR and  LF  characters  do
       not indicate newlines.

       For  example, the pattern /^abc$/ matches the subject string "def\nabc"
       (where \n represents a newline) in multiline mode, but  not  otherwise.
       Consequently,  patterns  that  are anchored in single line mode because
       all branches start with ^ are not anchored in  multiline  mode,  and  a
       match  for  circumflex  is  possible  when  the startoffset argument of
       pcre_exec() is non-zero. The PCRE_DOLLAR_ENDONLY option is  ignored  if
       PCRE_MULTILINE is set.

       Note  that  the sequences \A, \Z, and \z can be used to match the start
       matches all characters (including isolated CRs and LFs). When any  Uni-
       code  line endings are being recognized, dot does not match CR or LF or
       any of the other line ending characters.

       The behaviour of dot with regard to newlines can  be  changed.  If  the
       PCRE_DOTALL  option  is  set,  a dot matches any one character, without
       exception. If the two-character sequence CRLF is present in the subject
       string, it takes two dots to match it.

       The  handling of dot is entirely independent of the handling of circum-
       flex and dollar, the only relationship being  that  they  both  involve
       newlines. Dot has no special meaning in a character class.


MATCHING A SINGLE BYTE


       Outside a character class, the escape sequence \C matches any one byte,
       both in and out of UTF-8 mode. Unlike a  dot,  it  always  matches  any
       line-ending  characters.  The  feature  is provided in Perl in order to
       match individual bytes in UTF-8 mode. Because it breaks up UTF-8  char-
       acters  into individual bytes, what remains in the string may be a mal-
       formed UTF-8 string. For this reason, the \C escape  sequence  is  best
       avoided.

       PCRE  does  not  allow \C to appear in lookbehind assertions (described
       below), because in UTF-8 mode this would make it impossible  to  calcu-
       late the length of the lookbehind.


SQUARE BRACKETS AND CHARACTER CLASSES


       An opening square bracket introduces a character class, terminated by a
       closing square bracket. A closing square bracket on its own is not spe-
       cial. If a closing square bracket is required as a member of the class,
       it should be the first data character in the class  (after  an  initial
       circumflex, if present) or escaped with a backslash.

       A  character  class matches a single character in the subject. In UTF-8
       mode, the character may occupy more than one byte. A matched  character
       must be in the set of characters defined by the class, unless the first
       character in the class definition is a circumflex, in  which  case  the
       subject  character  must  not  be in the set defined by the class. If a
       circumflex is actually required as a member of the class, ensure it  is
       not the first character, or escape it with a backslash.

       For  example, the character class [aeiou] matches any lower case vowel,
       while [^aeiou] matches any character that is not a  lower  case  vowel.
       Note that a circumflex is just a convenient notation for specifying the
       characters that are in the class by enumerating those that are  not.  A
       class  that starts with a circumflex is not an assertion: it still con-
       sumes a character from the subject string, and therefore  it  fails  if
       the current pointer is at the end of the string.

       In  UTF-8 mode, characters with values greater than 255 can be included

       Characters  that  might  indicate  line breaks are never treated in any
       special way  when  matching  character  classes,  whatever  line-ending
       sequence  is  in  use,  and  whatever  setting  of  the PCRE_DOTALL and
       PCRE_MULTILINE options is used. A class such as [^a] always matches one
       of these characters.

       The  minus (hyphen) character can be used to specify a range of charac-
       ters in a character  class.  For  example,  [d-m]  matches  any  letter
       between  d  and  m,  inclusive.  If  a minus character is required in a
       class, it must be escaped with a backslash  or  appear  in  a  position
       where  it cannot be interpreted as indicating a range, typically as the
       first or last character in the class.

       It is not possible to have the literal character "]" as the end charac-
       ter  of a range. A pattern such as [W-]46] is interpreted as a class of
       two characters ("W" and "-") followed by a literal string "46]", so  it
       would  match  "W46]"  or  "-46]". However, if the "]" is escaped with a
       backslash it is interpreted as the end of range, so [W-\]46] is  inter-
       preted  as a class containing a range followed by two other characters.
       The octal or hexadecimal representation of "]" can also be used to  end
       a range.

       Ranges  operate in the collating sequence of character values. They can
       also  be  used  for  characters  specified  numerically,  for   example
       [\000-\037].  In UTF-8 mode, ranges can include characters whose values
       are greater than 255, for example [\x{100}-\x{2ff}].

       If a range that includes letters is used when caseless matching is set,
       it matches the letters in either case. For example, [W-c] is equivalent
       to [][\\^_`wxyzabc], matched caselessly,  and  in  non-UTF-8  mode,  if
       character  tables  for  a French locale are in use, [\xc8-\xcb] matches
       accented E characters in both cases. In UTF-8 mode, PCRE  supports  the
       concept  of  case for characters with values greater than 128 only when
       it is compiled with Unicode property support.

       The character types \d, \D, \p, \P, \s, \S, \w, and \W may also  appear
       in  a  character  class,  and add the characters that they match to the
       class. For example, [\dABCDEF] matches any hexadecimal digit. A circum-
       flex  can  conveniently  be used with the upper case character types to
       specify a more restricted set of characters  than  the  matching  lower
       case  type.  For example, the class [^\W_] matches any letter or digit,
       but not underscore.

       The only metacharacters that are recognized in  character  classes  are
       backslash,  hyphen  (only  where  it can be interpreted as specifying a
       range), circumflex (only at the start), opening  square  bracket  (only
       when  it can be interpreted as introducing a POSIX class name - see the
       next section), and the terminating  closing  square  bracket.  However,
       escaping other non-alphanumeric characters does no harm.


POSIX CHARACTER CLASSES

         cntrl    control characters
         digit    decimal digits (same as \d)
         graph    printing characters, excluding space
         lower    lower case letters
         print    printing characters, including space
         punct    printing characters, excluding letters and digits
         space    white space (not quite the same as \s)
         upper    upper case letters
         word     "word" characters (same as \w)
         xdigit   hexadecimal digits

       The "space" characters are HT (9), LF (10), VT (11), FF (12), CR  (13),
       and  space  (32). Notice that this list includes the VT character (code
       11). This makes "space" different to \s, which does not include VT (for
       Perl compatibility).

       The  name  "word"  is  a Perl extension, and "blank" is a GNU extension
       from Perl 5.8. Another Perl extension is negation, which  is  indicated
       by a ^ character after the colon. For example,

         [12[:^digit:]]

       matches  "1", "2", or any non-digit. PCRE (and Perl) also recognize the
       POSIX syntax [.ch.] and [=ch=] where "ch" is a "collating element", but
       these are not supported, and an error is given if they are encountered.

       In UTF-8 mode, characters with values greater than 128 do not match any
       of the POSIX character classes.


VERTICAL BAR


       Vertical  bar characters are used to separate alternative patterns. For
       example, the pattern

         gilbert|sullivan

       matches either "gilbert" or "sullivan". Any number of alternatives  may
       appear,  and  an  empty  alternative  is  permitted (matching the empty
       string). The matching process tries each alternative in turn, from left
       to  right, and the first one that succeeds is used. If the alternatives
       are within a subpattern (defined below), "succeeds" means matching  the
       rest  of the main pattern as well as the alternative in the subpattern.


INTERNAL OPTION SETTING


       The settings of the  PCRE_CASELESS,  PCRE_MULTILINE,  PCRE_DOTALL,  and
       PCRE_EXTENDED  options  (which are Perl-compatible) can be changed from
       within the pattern by  a  sequence  of  Perl  option  letters  enclosed
       between "(?" and ")".  The option letters are

         i  for PCRE_CASELESS
         m  for PCRE_MULTILINE

       When an option change occurs at top level (that is, not inside  subpat-
       tern  parentheses),  the change applies to the remainder of the pattern
       that follows.  If the change is placed right at the start of a pattern,
       PCRE extracts it into the global options (and it will therefore show up
       in data extracted by the pcre_fullinfo() function).

       An option change within a subpattern (see below for  a  description  of
       subpatterns) affects only that part of the current pattern that follows
       it, so

         (a(?i)b)c

       matches abc and aBc and no other strings (assuming PCRE_CASELESS is not
       used).   By  this means, options can be made to have different settings
       in different parts of the pattern. Any changes made in one  alternative
       do  carry  on  into subsequent branches within the same subpattern. For
       example,

         (a(?i)b|c)

       matches "ab", "aB", "c", and "C", even though  when  matching  "C"  the
       first  branch  is  abandoned before the option setting. This is because
       the effects of option settings happen at compile time. There  would  be
       some very weird behaviour otherwise.

       Note:  There  are  other  PCRE-specific  options that can be set by the
       application when the compile or match functions  are  called.  In  some
       cases  the  pattern  can  contain special leading sequences to override
       what the application has set or what has been  defaulted.  Details  are
       given in the section entitled "Newline sequences" above.


SUBPATTERNS


       Subpatterns are delimited by parentheses (round brackets), which can be
       nested.  Turning part of a pattern into a subpattern does two things:

       1. It localizes a set of alternatives. For example, the pattern

         cat(aract|erpillar|)

       matches one of the words "cat", "cataract", or  "caterpillar".  Without
       the  parentheses,  it  would  match  "cataract", "erpillar" or an empty
       string.

       2. It sets up the subpattern as  a  capturing  subpattern.  This  means
       that,  when  the  whole  pattern  matches,  that portion of the subject
       string that matched the subpattern is passed back to the caller via the
       ovector  argument  of pcre_exec(). Opening parentheses are counted from
       left to right (starting from 1) to obtain  numbers  for  the  capturing
       subpatterns.

       For  example,  if the string "the red king" is matched against the pat-

         the ((?:red|white) (king|queen))

       the captured substrings are "white queen" and "queen", and are numbered
       1 and 2. The maximum number of capturing subpatterns is 65535.

       As a convenient shorthand, if any option settings are required  at  the
       start  of  a  non-capturing  subpattern,  the option letters may appear
       between the "?" and the ":". Thus the two patterns

         (?i:saturday|sunday)
         (?:(?i)saturday|sunday)

       match exactly the same set of strings. Because alternative branches are
       tried  from  left  to right, and options are not reset until the end of
       the subpattern is reached, an option setting in one branch does  affect
       subsequent  branches,  so  the above patterns match "SUNDAY" as well as
       "Saturday".


DUPLICATE SUBPATTERN NUMBERS


       Perl 5.10 introduced a feature whereby each alternative in a subpattern
       uses  the same numbers for its capturing parentheses. Such a subpattern
       starts with (?| and is itself a non-capturing subpattern. For  example,
       consider this pattern:

         (?|(Sat)ur|(Sun))day

       Because  the two alternatives are inside a (?| group, both sets of cap-
       turing parentheses are numbered one. Thus, when  the  pattern  matches,
       you  can  look  at captured substring number one, whichever alternative
       matched. This construct is useful when you want to  capture  part,  but
       not all, of one of a number of alternatives. Inside a (?| group, paren-
       theses are numbered as usual, but the number is reset at the  start  of
       each  branch. The numbers of any capturing buffers that follow the sub-
       pattern start after the highest number used in any branch. The  follow-
       ing  example  is taken from the Perl documentation.  The numbers under-
       neath show in which buffer the captured content will be stored.

         # before  ---------------branch-reset----------- after
         / ( a )  (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
         # 1            2         2  3        2     3     4

       A backreference or a recursive call to  a  numbered  subpattern  always
       refers to the first one in the pattern with the given number.

       An  alternative approach to using this "branch reset" feature is to use
       duplicate named subpatterns, as described in the next section.


NAMED SUBPATTERNS


       Identifying capturing parentheses by number is simple, but  it  can  be
       Names  consist  of  up  to  32 alphanumeric characters and underscores.
       Named capturing parentheses are still  allocated  numbers  as  well  as
       names,  exactly as if the names were not present. The PCRE API provides
       function calls for extracting the name-to-number translation table from
       a compiled pattern. There is also a convenience function for extracting
       a captured substring by name.

       By default, a name must be unique within a pattern, but it is  possible
       to relax this constraint by setting the PCRE_DUPNAMES option at compile
       time. This can be useful for patterns where only one  instance  of  the
       named  parentheses  can  match. Suppose you want to match the name of a
       weekday, either as a 3-letter abbreviation or as the full name, and  in
       both cases you want to extract the abbreviation. This pattern (ignoring
       the line breaks) does the job:

         (?<;DN>;Mon|Fri|Sun)(?:day)?|
         (?<;DN>;Tue)(?:sday)?|
         (?<;DN>;Wed)(?:nesday)?|
         (?<;DN>;Thu)(?:rsday)?|
         (?<;DN>;Sat)(?:urday)?

       There are five capturing substrings, but only one is ever set  after  a
       match.  (An alternative way of solving this problem is to use a "branch
       reset" subpattern, as described in the previous section.)

       The convenience function for extracting the data by  name  returns  the
       substring  for  the first (and in this example, the only) subpattern of
       that name that matched. This saves searching  to  find  which  numbered
       subpattern  it  was. If you make a reference to a non-unique named sub-
       pattern from elsewhere in the pattern, the one that corresponds to  the
       lowest  number  is used. For further details of the interfaces for han-
       dling named subpatterns, see the pcreapi documentation.


REPETITION


       Repetition is specified by quantifiers, which can  follow  any  of  the
       following items:

         a literal data character
         the dot metacharacter
         the \C escape sequence
         the \X escape sequence (in UTF-8 mode with Unicode properties)
         the \R escape sequence
         an escape such as \d that matches a single character
         a character class
         a back reference (see next section)
         a parenthesized subpattern (unless it is an assertion)

       The  general repetition quantifier specifies a minimum and maximum num-
       ber of permitted matches, by giving the two numbers in  curly  brackets
       (braces),  separated  by  a comma. The numbers must be less than 65536,
       and the first must be less than or equal to the second. For example:

       matches exactly 8 digits. An opening curly bracket that  appears  in  a
       position  where a quantifier is not allowed, or one that does not match
       the syntax of a quantifier, is taken as a literal character. For  exam-
       ple, {,6} is not a quantifier, but a literal string of four characters.

       In UTF-8 mode, quantifiers apply to UTF-8  characters  rather  than  to
       individual bytes. Thus, for example, \x{100}{2} matches two UTF-8 char-
       acters, each of which is represented by a two-byte sequence. Similarly,
       when Unicode property support is available, \X{3} matches three Unicode
       extended sequences, each of which may be several bytes long  (and  they
       may be of different lengths).

       The quantifier {0} is permitted, causing the expression to behave as if
       the previous item and the quantifier were not present. This may be use-
       ful  for  subpatterns that are referenced as subroutines from elsewhere
       in the pattern. Items other than subpatterns that have a {0} quantifier
       are omitted from the compiled pattern.

       For  convenience, the three most common quantifiers have single-charac-
       ter abbreviations:

         *    is equivalent to {0,}
         +    is equivalent to {1,}
         ?    is equivalent to {0,1}

       It is possible to construct infinite loops by  following  a  subpattern
       that can match no characters with a quantifier that has no upper limit,
       for example:

         (a?)*

       Earlier versions of Perl and PCRE used to give an error at compile time
       for  such  patterns. However, because there are cases where this can be
       useful, such patterns are now accepted, but if any  repetition  of  the
       subpattern  does in fact match no characters, the loop is forcibly bro-
       ken.

       By default, the quantifiers are "greedy", that is, they match  as  much
       as  possible  (up  to  the  maximum number of permitted times), without
       causing the rest of the pattern to fail. The classic example  of  where
       this gives problems is in trying to match comments in C programs. These
       appear between /* and */ and within the comment,  individual  *  and  /
       characters  may  appear. An attempt to match C comments by applying the
       pattern

         /\*.*\*/

       to the string

         /* first comment */  not comment  /* second comment */


         \d??\d

       which matches one digit by preference, but can match two if that is the
       only way the rest of the pattern matches.

       If the PCRE_UNGREEDY option is set (an option that is not available  in
       Perl),  the  quantifiers are not greedy by default, but individual ones
       can be made greedy by following them with a  question  mark.  In  other
       words, it inverts the default behaviour.

       When  a  parenthesized  subpattern  is quantified with a minimum repeat
       count that is greater than 1 or with a limited maximum, more memory  is
       required  for  the  compiled  pattern, in proportion to the size of the
       minimum or maximum.

       If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equiv-
       alent  to  Perl's  /s) is set, thus allowing the dot to match newlines,
       the pattern is implicitly anchored, because whatever  follows  will  be
       tried  against every character position in the subject string, so there
       is no point in retrying the overall match at  any  position  after  the
       first.  PCRE  normally treats such a pattern as though it were preceded
       by \A.

       In cases where it is known that the subject  string  contains  no  new-
       lines,  it  is  worth setting PCRE_DOTALL in order to obtain this opti-
       mization, or alternatively using ^ to indicate anchoring explicitly.

       However, there is one situation where the optimization cannot be  used.
       When  .*   is  inside  capturing  parentheses that are the subject of a
       backreference elsewhere in the pattern, a match at the start  may  fail
       where a later one succeeds. Consider, for example:

         (.*)abc\1

       If  the subject is "xyz123abc123" the match point is the fourth charac-
       ter. For this reason, such a pattern is not implicitly anchored.

       When a capturing subpattern is repeated, the value captured is the sub-
       string that matched the final iteration. For example, after

         (tweedle[dume]{3}\s*)+

       has matched "tweedledum tweedledee" the value of the captured substring
       is "tweedledee". However, if there are  nested  capturing  subpatterns,
       the  corresponding captured values may have been set in previous itera-
       tions. For example, after

         /(a|(b))+/

       matches "aba" the value of the second captured substring is "b".


       After matching all 6 digits and then failing to match "foo", the normal
       action of the matcher is to try again with only 5 digits  matching  the
       \d+  item,  and  then  with  4,  and  so on, before ultimately failing.
       "Atomic grouping" (a term taken from Jeffrey  Friedl's  book)  provides
       the  means for specifying that once a subpattern has matched, it is not
       to be re-evaluated in this way.

       If we use atomic grouping for the previous example, the  matcher  gives
       up  immediately  on failing to match "foo" the first time. The notation
       is a kind of special parenthesis, starting with (?>; as in this example:

         (?>;\d+)foo

       This  kind  of  parenthesis "locks up" the  part of the pattern it con-
       tains once it has matched, and a failure further into  the  pattern  is
       prevented  from  backtracking into it. Backtracking past it to previous
       items, however, works as normal.

       An alternative description is that a subpattern of  this  type  matches
       the  string  of  characters  that an identical standalone pattern would
       match, if anchored at the current point in the subject string.

       Atomic grouping subpatterns are not capturing subpatterns. Simple cases
       such as the above example can be thought of as a maximizing repeat that
       must swallow everything it can. So, while both \d+ and  \d+?  are  pre-
       pared  to  adjust  the number of digits they match in order to make the
       rest of the pattern match, (?>;\d+) can only match an entire sequence of
       digits.

       Atomic  groups in general can of course contain arbitrarily complicated
       subpatterns, and can be nested. However, when  the  subpattern  for  an
       atomic group is just a single repeated item, as in the example above, a
       simpler notation, called a "possessive quantifier" can  be  used.  This
       consists  of  an  additional  + character following a quantifier. Using
       this notation, the previous example can be rewritten as

         \d++foo

       Note that a possessive quantifier can be used with an entire group, for
       example:

         (abc|xyz){2,3}+

       Possessive   quantifiers   are   always  greedy;  the  setting  of  the
       PCRE_UNGREEDY option is ignored. They are a convenient notation for the
       simpler  forms  of atomic group. However, there is no difference in the
       meaning of a possessive quantifier and  the  equivalent  atomic  group,
       though  there  may  be a performance difference; possessive quantifiers
       should be slightly faster.

       The possessive quantifier syntax is an extension to the Perl  5.8  syn-

         (\D+|<;\d+>;)*[!?]

       matches an unlimited number of substrings that either consist  of  non-
       digits,  or  digits  enclosed in <;>;, followed by either ! or ?. When it
       matches, it runs quickly. However, if it is applied to

         aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

       it takes a long time before reporting  failure.  This  is  because  the
       string  can be divided between the internal \D+ repeat and the external
       * repeat in a large number of ways, and all  have  to  be  tried.  (The
       example  uses  [!?]  rather than a single character at the end, because
       both PCRE and Perl have an optimization that allows  for  fast  failure
       when  a single character is used. They remember the last single charac-
       ter that is required for a match, and fail early if it is  not  present
       in  the  string.)  If  the pattern is changed so that it uses an atomic
       group, like this:

         ((?>;\D+)|<;\d+>;)*[!?]

       sequences of non-digits cannot be broken, and failure happens  quickly.


BACK REFERENCES


       Outside a character class, a backslash followed by a digit greater than
       0 (and possibly further digits) is a back reference to a capturing sub-
       pattern  earlier  (that is, to its left) in the pattern, provided there
       have been that many previous capturing left parentheses.

       However, if the decimal number following the backslash is less than 10,
       it  is  always  taken  as a back reference, and causes an error only if
       there are not that many capturing left parentheses in the  entire  pat-
       tern.  In  other words, the parentheses that are referenced need not be
       to the left of the reference for numbers less than 10. A "forward  back
       reference"  of  this  type can make sense when a repetition is involved
       and the subpattern to the right has participated in an  earlier  itera-
       tion.

       It  is  not  possible to have a numerical "forward back reference" to a
       subpattern whose number is 10 or  more  using  this  syntax  because  a
       sequence  such  as  \50 is interpreted as a character defined in octal.
       See the subsection entitled "Non-printing characters" above for further
       details  of  the  handling of digits following a backslash. There is no
       such problem when named parentheses are used. A back reference  to  any
       subpattern is possible using named parentheses (see below).

       Another  way  of  avoiding  the ambiguity inherent in the use of digits
       following a backslash is to use the \g escape sequence, which is a fea-
       ture  introduced  in  Perl  5.10.  This  escape  must be followed by an
       unsigned number or a negative number, optionally  enclosed  in  braces.
       These examples are all identical:
       \g{-2} would be equivalent to \1. The use of relative references can be
       helpful  in  long  patterns,  and  also in patterns that are created by
       joining together fragments that contain references within themselves.

       A back reference matches whatever actually matched the  capturing  sub-
       pattern  in  the  current subject string, rather than anything matching
       the subpattern itself (see "Subpatterns as subroutines" below for a way
       of doing that). So the pattern

         (sens|respons)e and \1ibility

       matches  "sense and sensibility" and "response and responsibility", but
       not "sense and responsibility". If caseful matching is in force at  the
       time  of the back reference, the case of letters is relevant. For exam-
       ple,

         ((?i)rah)\s+\1

       matches "rah rah" and "RAH RAH", but not "RAH  rah",  even  though  the
       original capturing subpattern is matched caselessly.

       There  are  several  different ways of writing back references to named
       subpatterns. The .NET syntax \k{name} and the Perl syntax  \k<;name>;  or
       \k'name'  are supported, as is the Python syntax (?P=name). Perl 5.10's
       unified back reference syntax, in which \g can be used for both numeric
       and  named  references,  is  also supported. We could rewrite the above
       example in any of the following ways:

         (?<;p1>;(?i)rah)\s+\k<;p1>;
         (?'p1'(?i)rah)\s+\k{p1}
         (?P<;p1>;(?i)rah)\s+(?P=p1)
         (?<;p1>;(?i)rah)\s+\g{p1}

       A subpattern that is referenced by  name  may  appear  in  the  pattern
       before or after the reference.

       There  may be more than one back reference to the same subpattern. If a
       subpattern has not actually been used in a particular match,  any  back
       references to it always fail. For example, the pattern

         (a|(bc))\2

       always  fails if it starts to match "a" rather than "bc". Because there
       may be many capturing parentheses in a pattern,  all  digits  following
       the  backslash  are taken as part of a potential back reference number.
       If the pattern continues with a digit character, some delimiter must be
       used  to  terminate  the back reference. If the PCRE_EXTENDED option is
       set, this can be whitespace.  Otherwise an  empty  comment  (see  "Com-
       ments" below) can be used.

       A  back reference that occurs inside the parentheses to which it refers
       fails when the subpattern is first used, so, for example,  (a\1)  never
       An  assertion  is  a  test on the characters following or preceding the
       current matching point that does not actually consume  any  characters.
       The  simple  assertions  coded  as  \b, \B, \A, \G, \Z, \z, ^ and $ are
       described above.

       More complicated assertions are coded as  subpatterns.  There  are  two
       kinds:  those  that  look  ahead of the current position in the subject
       string, and those that look  behind  it.  An  assertion  subpattern  is
       matched  in  the  normal way, except that it does not cause the current
       matching position to be changed.

       Assertion subpatterns are not capturing subpatterns,  and  may  not  be
       repeated,  because  it  makes no sense to assert the same thing several
       times. If any kind of assertion contains capturing  subpatterns  within
       it,  these are counted for the purposes of numbering the capturing sub-
       patterns in the whole pattern.  However, substring capturing is carried
       out  only  for  positive assertions, because it does not make sense for
       negative assertions.

   Lookahead assertions

       Lookahead assertions start with (?= for positive assertions and (?! for
       negative assertions. For example,

         \w+(?=;)

       matches  a word followed by a semicolon, but does not include the semi-
       colon in the match, and

         foo(?!bar)

       matches any occurrence of "foo" that is not  followed  by  "bar".  Note
       that the apparently similar pattern

         (?!foo)bar

       does  not  find  an  occurrence  of "bar" that is preceded by something
       other than "foo"; it finds any occurrence of "bar" whatsoever,  because
       the assertion (?!foo) is always true when the next three characters are
       "bar". A lookbehind assertion is needed to achieve the other effect.

       If you want to force a matching failure at some point in a pattern, the
       most  convenient  way  to  do  it  is with (?!) because an empty string
       always matches, so an assertion that requires there not to be an  empty
       string must always fail.

   Lookbehind assertions

       Lookbehind  assertions start with (?<;= for positive assertions and (?<;!
       for negative assertions. For example,

         (?<;!foo)bar

       strings  are permitted only at the top level of a lookbehind assertion.
       This is an extension compared with  Perl  (at  least  for  5.8),  which
       requires  all branches to match the same length of string. An assertion
       such as

         (?<;=ab(c|de))

       is not permitted, because its single top-level  branch  can  match  two
       different  lengths,  but  it is acceptable if rewritten to use two top-
       level branches:

         (?<;=abc|abde)

       In some cases, the Perl 5.10 escape sequence \K (see above) can be used
       instead  of  a lookbehind assertion; this is not restricted to a fixed-
       length.

       The implementation of lookbehind assertions is, for  each  alternative,
       to  temporarily  move the current position back by the fixed length and
       then try to match. If there are insufficient characters before the cur-
       rent position, the assertion fails.

       PCRE does not allow the \C escape (which matches a single byte in UTF-8
       mode) to appear in lookbehind assertions, because it makes it  impossi-
       ble  to  calculate the length of the lookbehind. The \X and \R escapes,
       which can match different numbers of bytes, are also not permitted.

       Possessive quantifiers can  be  used  in  conjunction  with  lookbehind
       assertions  to  specify  efficient  matching  at the end of the subject
       string. Consider a simple pattern such as

         abcd$

       when applied to a long string that does  not  match.  Because  matching
       proceeds from left to right, PCRE will look for each "a" in the subject
       and then see if what follows matches the rest of the  pattern.  If  the
       pattern is specified as

         ^.*abcd$

       the  initial .* matches the entire string at first, but when this fails
       (because there is no following "a"), it backtracks to match all but the
       last  character,  then all but the last two characters, and so on. Once
       again the search for "a" covers the entire string, from right to  left,
       so we are no better off. However, if the pattern is written as

         ^.*+(?<;=abcd)

       there  can  be  no backtracking for the .*+ item; it can match only the
       entire string. The subsequent lookbehind assertion does a  single  test
       on  the last four characters. If it fails, the match fails immediately.
       For long strings, this approach makes a significant difference  to  the
       three  of  which  are not "999". For example, it doesn't match "123abc-
       foo". A pattern to do that is

         (?<;=\d{3}...)(?<;!999)foo

       This time the first assertion looks at the  preceding  six  characters,
       checking that the first three are digits, and then the second assertion
       checks that the preceding three characters are not "999".

       Assertions can be nested in any combination. For example,

         (?<;=(?<;!foo)bar)baz

       matches an occurrence of "baz" that is preceded by "bar" which in  turn
       is not preceded by "foo", while

         (?<;=\d{3}(?!999)...)foo

       is  another pattern that matches "foo" preceded by three digits and any
       three characters that are not "999".


CONDITIONAL SUBPATTERNS


       It is possible to cause the matching process to obey a subpattern  con-
       ditionally  or to choose between two alternative subpatterns, depending
       on the result of an assertion, or whether a previous capturing  subpat-
       tern  matched  or not. The two possible forms of conditional subpattern
       are

         (?(condition)yes-pattern)
         (?(condition)yes-pattern|no-pattern)

       If the condition is satisfied, the yes-pattern is used;  otherwise  the
       no-pattern  (if  present)  is used. If there are more than two alterna-
       tives in the subpattern, a compile-time error occurs.

       There are four kinds of condition: references  to  subpatterns,  refer-
       ences to recursion, a pseudo-condition called DEFINE, and assertions.

   Checking for a used subpattern by number

       If  the  text between the parentheses consists of a sequence of digits,
       the condition is true if the capturing subpattern of  that  number  has
       previously  matched.  An  alternative notation is to precede the digits
       with a plus or minus sign. In this case, the subpattern number is rela-
       tive rather than absolute.  The most recently opened parentheses can be
       referenced by (?(-1), the next most recent by (?(-2),  and  so  on.  In
       looping constructs it can also make sense to refer to subsequent groups
       with constructs such as (?(+2).

       Consider the following pattern, which  contains  non-significant  white
       space to make it more readable (assume the PCRE_EXTENDED option) and to

       If  you  were  embedding  this pattern in a larger one, you could use a
       relative reference:

         ...other stuff... ( \( )?    [^()]+    (?(-1) \) ) ...

       This makes the fragment independent of the parentheses  in  the  larger
       pattern.

   Checking for a used subpattern by name

       Perl  uses  the  syntax  (?(<;name>;)...) or (?('name')...) to test for a
       used subpattern by name. For compatibility  with  earlier  versions  of
       PCRE,  which  had this facility before Perl, the syntax (?(name)...) is
       also recognized. However, there is a possible ambiguity with this  syn-
       tax,  because  subpattern  names  may  consist entirely of digits. PCRE
       looks first for a named subpattern; if it cannot find one and the  name
       consists  entirely  of digits, PCRE looks for a subpattern of that num-
       ber, which must be greater than zero. Using subpattern names that  con-
       sist entirely of digits is not recommended.

       Rewriting the above example to use a named subpattern gives this:

         (?<;OPEN>; \( )?    [^()]+    (?(<;OPEN>;) \) )


   Checking for pattern recursion

       If the condition is the string (R), and there is no subpattern with the
       name R, the condition is true if a recursive call to the whole  pattern
       or any subpattern has been made. If digits or a name preceded by amper-
       sand follow the letter R, for example:

         (?(R3)...) or (?(R&;name)...)

       the condition is true if the most recent recursion is into the  subpat-
       tern  whose  number or name is given. This condition does not check the
       entire recursion stack.

       At "top level", all these recursion test conditions are  false.  Recur-
       sive patterns are described below.

   Defining subpatterns for use by reference only

       If  the  condition  is  the string (DEFINE), and there is no subpattern
       with the name DEFINE, the condition is  always  false.  In  this  case,
       there  may  be  only  one  alternative  in the subpattern. It is always
       skipped if control reaches this point  in  the  pattern;  the  idea  of
       DEFINE  is that it can be used to define "subroutines" that can be ref-
       erenced from elsewhere. (The use of "subroutines" is described  below.)
       For  example,  a pattern to match an IPv4 address could be written like
       this (ignore whitespace and line breaks):

   Assertion conditions

       If the condition is not in any of the above  formats,  it  must  be  an
       assertion.   This may be a positive or negative lookahead or lookbehind
       assertion. Consider  this  pattern,  again  containing  non-significant
       white space, and with the two alternatives on the second line:

         (?(?=[^a-z]*[a-z])
         \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )

       The  condition  is  a  positive  lookahead  assertion  that  matches an
       optional sequence of non-letters followed by a letter. In other  words,
       it  tests  for the presence of at least one letter in the subject. If a
       letter is found, the subject is matched against the first  alternative;
       otherwise  it  is  matched  against  the  second.  This pattern matches
       strings in one of the two forms dd-aaa-dd or dd-dd-dd,  where  aaa  are
       letters and dd are digits.


COMMENTS


       The  sequence (?# marks the start of a comment that continues up to the
       next closing parenthesis. Nested parentheses  are  not  permitted.  The
       characters  that make up a comment play no part in the pattern matching
       at all.

       If the PCRE_EXTENDED option is set, an unescaped # character outside  a
       character  class  introduces  a  comment  that continues to immediately
       after the next newline in the pattern.


RECURSIVE PATTERNS


       Consider the problem of matching a string in parentheses, allowing  for
       unlimited  nested  parentheses.  Without the use of recursion, the best
       that can be done is to use a pattern that  matches  up  to  some  fixed
       depth  of  nesting.  It  is not possible to handle an arbitrary nesting
       depth.

       For some time, Perl has provided a facility that allows regular expres-
       sions  to recurse (amongst other things). It does this by interpolating
       Perl code in the expression at run time, and the code can refer to  the
       expression itself. A Perl pattern using code interpolation to solve the
       parentheses problem can be created like this:

         $re = qr{\( (?: (?>;[^()]+) | (?p{$re}) )* \)}x;

       The (?p{...}) item interpolates Perl code at run time, and in this case
       refers recursively to the pattern in which it appears.

       Obviously, PCRE cannot support the interpolation of Perl code. Instead,
       it supports special syntax for recursion of  the  entire  pattern,  and
       also  for  individual  subpattern  recursion. After its introduction in
       PCRE and Python, this kind of recursion was  introduced  into  Perl  at
       This  PCRE  pattern  solves  the nested parentheses problem (assume the
       PCRE_EXTENDED option is set so that white space is ignored):

         \( ( (?>;[^()]+) | (?R) )* \)

       First it matches an opening parenthesis. Then it matches any number  of
       substrings  which  can  either  be  a sequence of non-parentheses, or a
       recursive match of the pattern itself (that is, a  correctly  parenthe-
       sized substring).  Finally there is a closing parenthesis.

       If  this  were  part of a larger pattern, you would not want to recurse
       the entire pattern, so instead you could use this:

         ( \( ( (?>;[^()]+) | (?1) )* \) )

       We have put the pattern into parentheses, and caused the  recursion  to
       refer to them instead of the whole pattern.

       In  a  larger  pattern,  keeping  track  of  parenthesis numbers can be
       tricky. This is made easier by the use of relative references. (A  Perl
       5.10  feature.)   Instead  of  (?1)  in the pattern above you can write
       (?-2) to refer to the second most recently opened parentheses preceding
       the  recursion.  In  other  words,  a  negative number counts capturing
       parentheses leftwards from the point at which it is encountered.

       It is also possible to refer to  subsequently  opened  parentheses,  by
       writing  references  such  as (?+2). However, these cannot be recursive
       because the reference is not inside the  parentheses  that  are  refer-
       enced.  They  are  always  "subroutine" calls, as described in the next
       section.

       An alternative approach is to use named parentheses instead.  The  Perl
       syntax  for  this  is (?&;name); PCRE's earlier syntax (?P>;name) is also
       supported. We could rewrite the above example as follows:

         (?<;pn>; \( ( (?>;[^()]+) | (?&;pn) )* \) )

       If there is more than one subpattern with the same name,  the  earliest
       one is used.

       This  particular  example pattern that we have been looking at contains
       nested unlimited repeats, and so the use of atomic grouping for  match-
       ing  strings  of non-parentheses is important when applying the pattern
       to strings that do not match. For example, when this pattern is applied
       to

         (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()

       it  yields "no match" quickly. However, if atomic grouping is not used,
       the match runs for a very long time indeed because there  are  so  many
       different  ways  the  + and * repeats can carve up the subject, and all
       have to be tested before failure can be reported.
            ^                        ^
            ^                        ^

       the string they capture is "ab(cd)ef", the contents of  the  top  level
       parentheses.  If there are more than 15 capturing parentheses in a pat-
       tern, PCRE has to obtain extra memory to store data during a recursion,
       which  it  does  by  using pcre_malloc, freeing it via pcre_free after-
       wards. If  no  memory  can  be  obtained,  the  match  fails  with  the
       PCRE_ERROR_NOMEMORY error.

       Do  not  confuse  the (?R) item with the condition (R), which tests for
       recursion.  Consider this pattern, which matches text in  angle  brack-
       ets,  allowing for arbitrary nesting. Only digits are allowed in nested
       brackets (that is, when recursing), whereas any characters are  permit-
       ted at the outer level.

         <; (?: (?(R) \d++  | [^<;>;]*+) | (?R)) * >;

       In  this  pattern, (?(R) is the start of a conditional subpattern, with
       two different alternatives for the recursive and  non-recursive  cases.
       The (?R) item is the actual recursive call.


SUBPATTERNS AS SUBROUTINES


       If the syntax for a recursive subpattern reference (either by number or
       by name) is used outside the parentheses to which it refers,  it  oper-
       ates  like a subroutine in a programming language. The "called" subpat-
       tern may be defined before or after the reference. A numbered reference
       can be absolute or relative, as in these examples:

         (...(absolute)...)...(?2)...
         (...(relative)...)...(?-1)...
         (...(?+1)...(relative)...

       An earlier example pointed out that the pattern

         (sens|respons)e and \1ibility

       matches  "sense and sensibility" and "response and responsibility", but
       not "sense and responsibility". If instead the pattern

         (sens|respons)e and (?1)ibility

       is used, it does match "sense and responsibility" as well as the  other
       two  strings.  Another  example  is  given  in the discussion of DEFINE
       above.

       Like recursive subpatterns, a "subroutine" call is always treated as an
       atomic  group. That is, once it has matched some of the subject string,
       it is never re-entered, even if it contains  untried  alternatives  and
       there is a subsequent matching failure.

       possibly  recursively. Here are two of the examples used above, rewrit-
       ten using this syntax:

         (?<;pn>; \( ( (?>;[^()]+) | \g<;pn>; )* \) )
         (sens|respons)e and \g'1'ibility

       PCRE supports an extension to Oniguruma: if a number is preceded  by  a
       plus or a minus sign it is taken as a relative reference. For example:

         (abc)(?i:\g<;-1>;)

       Note  that \g{...} (Perl syntax) and \g<;...>; (Oniguruma syntax) are not
       synonymous. The former is a back reference; the latter is a  subroutine
       call.


CALLOUTS


       Perl has a feature whereby using the sequence (?{...}) causes arbitrary
       Perl code to be obeyed in the middle of matching a regular  expression.
       This makes it possible, amongst other things, to extract different sub-
       strings that match the same pair of parentheses when there is a repeti-
       tion.

       PCRE provides a similar feature, but of course it cannot obey arbitrary
       Perl code. The feature is called "callout". The caller of PCRE provides
       an  external function by putting its entry point in the global variable
       pcre_callout.  By default, this variable contains NULL, which  disables
       all calling out.

       Within  a  regular  expression,  (?C) indicates the points at which the
       external function is to be called. If you want  to  identify  different
       callout  points, you can put a number less than 256 after the letter C.
       The default value is zero.  For example, this pattern has  two  callout
       points:

         (?C1)abc(?C2)def

       If the PCRE_AUTO_CALLOUT flag is passed to pcre_compile(), callouts are
       automatically installed before each item in the pattern. They  are  all
       numbered 255.

       During matching, when PCRE reaches a callout point (and pcre_callout is
       set), the external function is called. It is provided with  the  number
       of  the callout, the position in the pattern, and, optionally, one item
       of data originally supplied by the caller of pcre_exec().  The  callout
       function  may cause matching to proceed, to backtrack, or to fail alto-
       gether. A complete description of the interface to the callout function
       is given in the pcrecallout documentation.


BACKTRACKING CONTROL


       Perl  5.10 introduced a number of "Special Backtracking Control Verbs",
       the form (*VERB:ARG) but PCRE does not support the use of arguments, so
       its  general  form is just (*VERB). Any number of these verbs may occur
       in a pattern. There are two kinds:

   Verbs that act immediately

       The following verbs act as soon as they are encountered:

          (*ACCEPT)

       This verb causes the match to end successfully, skipping the  remainder
       of  the pattern. When inside a recursion, only the innermost pattern is
       ended immediately. PCRE differs  from  Perl  in  what  happens  if  the
       (*ACCEPT)  is inside capturing parentheses. In Perl, the data so far is
       captured: in PCRE no data is captured. For example:

         A(A|B(*ACCEPT)|C)D

       This matches "AB", "AAD", or "ACD", but when it matches "AB",  no  data
       is captured.

         (*FAIL) or (*F)

       This  verb  causes the match to fail, forcing backtracking to occur. It
       is equivalent to (?!) but easier to read. The Perl documentation  notes
       that  it  is  probably  useful only when combined with (?{}) or (??{}).
       Those are, of course, Perl features that are not present in  PCRE.  The
       nearest  equivalent is the callout feature, as for example in this pat-
       tern:

         a+(?C)(*FAIL)

       A match with the string "aaaa" always fails, but the callout  is  taken
       before each backtrack happens (in this example, 10 times).

   Verbs that act after backtracking

       The following verbs do nothing when they are encountered. Matching con-
       tinues with what follows, but if there is no subsequent match, a  fail-
       ure  is  forced.   The  verbs  differ  in  exactly what kind of failure
       occurs.

         (*COMMIT)

       This verb causes the whole match to fail outright if the  rest  of  the
       pattern  does  not match. Even if the pattern is unanchored, no further
       attempts to find a match by advancing the start point take place.  Once
       (*COMMIT)  has been passed, pcre_exec() is committed to finding a match
       at the current starting point, or not at all. For example:

         a+(*COMMIT)b


         (*SKIP)

       This  verb  is like (*PRUNE), except that if the pattern is unanchored,
       the "bumpalong" advance is not to the next character, but to the  posi-
       tion  in  the  subject where (*SKIP) was encountered. (*SKIP) signifies
       that whatever text was matched leading up to it cannot  be  part  of  a
       successful match. Consider:

         a+(*SKIP)b

       If  the  subject  is  "aaaac...",  after  the first match attempt fails
       (starting at the first character in the  string),  the  starting  point
       skips on to start the next attempt at "c". Note that a possessive quan-
       tifer does not have the same effect in this example; although it  would
       suppress  backtracking  during  the  first  match  attempt,  the second
       attempt would start at the second character instead of skipping  on  to
       "c".

         (*THEN)

       This verb causes a skip to the next alternation if the rest of the pat-
       tern does not match. That is, it cancels pending backtracking, but only
       within  the  current  alternation.  Its name comes from the observation
       that it can be used for a pattern-based if-then-else block:

         ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...

       If the COND1 pattern matches, FOO is tried (and possibly further  items
       after  the  end  of  the group if FOO succeeds); on failure the matcher
       skips to the second alternative and tries COND2,  without  backtracking
       into  COND1.  If  (*THEN)  is  used outside of any alternation, it acts
       exactly like (*PRUNE).


SEE ALSO


       pcreapi(3), pcrecallout(3), pcrematching(3), pcre(3).


AUTHOR


       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.


REVISION


       Last updated: 19 April 2008
       Copyright (c) 1997-2008 University of Cambridge.



                                                                PCREPATTERN(3)

Man(1) output converted with man2html

© Embedthis Software. All rights reserved.